433IH
Column Mount Lock Receiver For mounting the Automatic Gate Lock or Bulldog Pedestrian Lock
in areas with limited space between the gate and post, such as brick
columns or walls.
349IH
Column Mount Bracket For column installation of the GTO/PRO 3000 series operators.
Designed for mounting the Post Pivot Bracket on masonry columns or
any flat surface. Two Brackets are required for each operator.
348IH & 347IH
Push to Open Brackets For Mighty Mule and PRO series operators that push instead
of pull the gate open.
RB707
Splice Kit-Above Ground
For splicing secure and moisture resistant above-ground splices.
RB708
Splice Kit-Direct Burial
For splicing secure and moisture resistant below-ground splices.
RB509
GTO Low Voltage Wire The 16 gauge dual conductor, multi-stranded, direct burial low
voltage wire is required to connect the control board to the solar
panel or the AC transformer. This wire is also required for installation
of some accessories such as keypads, locks, or push buttons.
FM317
GTO NEMA Box GTO's NEMA 4X rated weatherproof box is large enough
(14" W x 6" D x 16" H) to accommodate all add-on items
necessary for custom gate operator installations. It is made of fire
retardant ABS and comes with a heavy duty 14 gauge steel backing plate
for mounting accessories. The unique, lockable cover can be completely
removed for easier access during installation and service.
RB464
Post Bracket for 4" gate post 4" (O.D.) Post Bracket
(RB464)
Recommended for mounting GTO/PRO 2000
to a four inch gate post.
RB469
Round Post Bracket Adapters for 4" gate post These adapters
are necessary when mounting the 4" post bracket to a 4"
(O.D.) gate post. Two are required for each gate. Use with 4"
Post Bracket (RB464).
RB207
#41 DC Slide Gate Chain For SL-1000 / SL-2000 series.
RB3170 #40 AC Basic Slide Gate Chain For SL-5000 series.
RB3172 #50 AC Advanced Slide Gate
Chain For SL-6000 series.
(All the slide gate chains other then the 32' are in
ten foot sections with master links to connect the segments of chain
into the proper length required.)